Installing The Storage Module - HPE Synergy 12000 Frame Setup And Installation Manual

Installing the storage module

Prerequisites
CAUTION: Installation of the storage module into the frame without drives requires one person. Installation of the
storage module into the frame with drives already installed requires two people.
Be sure that you have the required number of people to lift the storage module into the frame.
Procedure
1. Before installing the storage module, press down the storage module release latch to open the storage module handle.
NOTE: The storage module handle arrives packaged in the closed position and must be opened prior to installation.
2. Install the storage module. To fully seat the storage module, be sure to close the storage module handle. When the
handle is completely closed, the release latch clicks into place.
66 Installation