To set the Business Status
Pswd:
RETRY
Atdt avail: Y
CHNG
Business open: N
CHNG
Changing greetings or the Business Status from a remote
telephone
You can change a greeting or the Business Status from the dialpad of external tone dial telephone.
You must do remote administration through the System Administrator Mailbox. For information
about remote administration, refer to the CallPilot Reference Guide.
Setting up line answering
CallPilot can answer all your Central Office (CO) lines included in line configuration. You can
designate whether or not CallPilot answers your company lines. When Answer Lines is enabled,
CallPilot answers the incoming calls and presents each caller with the Company Greeting and the
Automated Attendant menu. When Answer Lines is disabled, CallPilot does not answer incoming
calls. Your receptionist must answer and route incoming calls.
For more information about line configuration, refer to
To assign Answer Lines
Pswd:
RETRY
Atdt aval: N
CHNG
Business open: N
CHNG
Answer lines? N
CHNG
Press ≤·°¤.
1
Enter the Operator password and press OK.
2
OK
Press NEXT.
3
NEXT
Press CHNG to toggle between Y and N.
4
NEXT
Press ® to end the session.
5
Press ≤·°¤.
1
Enter the Operator password and press OK.
2
OK
Press NEXT.
3
NEXT
Press NEXT.
4
NEXT
Press CHNG.
5
NEXT
If you set Answer Lines to N the display shows:Disabling...
If you set Answer Lines is set to Y the display shows: Enabling...
Press ® to end the session.
6
Chapter 9 CallPilot operations
"Configuring line answering" on page
CallPilot Telephone Administration Guide
109
58.