Color Registration Procedure (Manual Correction) - Kyocera Taskalfa Pro 15000c Operation Manual

Adjustment/Maintenance Menu > Correcting Color Drift

Color Registration Procedure (Manual Correction)

This section explains how to print a chart from Cassette 1 (as an example) to correct the position of color printing.
1
2
Load paper.
CAUTION
• The top/bottom and sides of the paper must be even when loading the paper. Any
part of the paper that is out of place may fold, contact the print head, and cause
failure or a paper jam.
• Before loading the paper, be sure that it is not curled or folded. The fold or curl may
damage the print head or cause a paper jam.
• Adjust the paper length guide and paper width guide so that there are no gaps
between the guides and the paper. Any part of the paper that is out of place may
fold, contact the print head, and cause print head damage, skewed feeding, or a
paper jam.
IMPORTANT
• Load A4/Letter size paper or larger.
• After removing new paper from its packaging, fan the paper before loading it in the
cassette.
Precautions on Paper (page 7-8)
• Load the paper with the print side facing down.
• To print a chart from Cassette 5 to 8, the Multipurpose Tray, or the 550-sheet
Multipurpose Tray, load the paper with the print side up.
• Align the edges of the paper before loading it.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
above).
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Color Registration - Manual]
18-6