Kyocera Taskalfa Pro 15000c Operation Manual page 547

Troubleshooting > Other Trouble
Message
Staple jam.
System error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 15-23)
T
Message
The cover is open.
The removable
memory is not
formatted.
The slit glass requires
cleaning.
This user account is
locked out.
Time for maintenance
soon. #####
Tray # is full of paper.
U
Message
Unknown Ink
Installed. PC
[C][M][Y][K]
Checkpoints
—
—
Checkpoints
Is there any cover which is
open?
Is the removable memory
formatted by this machine?
—
—
—
Is the acceptable storage
capacity exceeded?
Is the paper curled?
Checkpoints
Does the installed ink
container's regional
specification match the
machine's?
19-52
Corrective Actions
If a staple jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed staple.
System error has occurred.
Follow the instructions on the
screen.
Corrective Actions
Close the cover indicated on the
screen.
Perform [Format] on this
machine.
Clean the slit glass using the
cleaning cloth supplied with the
document processor.
Contact administrator.
The job is canceled. Select
[End].
Contact your service
representative.
Remove the paper. Printing then
resumes.
Check the checkpoints of
"Printouts are curled." in
Troubleshooting When Feeding
Paper and take the corrective
actions.
Corrective Actions
Install the specified cartridge.
Reference
Page
page 19-29
—
Reference
Page
―
page 14-13
page 17-2
―
—
—
page 19-20
Reference
Page
—