Kyocera Taskalfa Pro 15000c Operation Manual page 539

Troubleshooting > Other Trouble
Message
Box limit exceeded.
Broadcast error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 15-23)
C
Message
Cannot Banner Print.
Cannot connect to
Authentication
*1
Server.
Cannot connect to
Server.
Cannot duplex print
on this paper.
Checkpoints
*1
Is [End] displayed on the
screen?
—
—
Checkpoints
―
—
—
—
—
—
Did you select a paper size/type
*1
that cannot be duplex printed?
Corrective Actions
The specified box is full, and no
further storage is available. Job
is canceled. Select [End]. Try to
perform the job again after
printing or deleting data from the
box.
Repeat Copy box is full, and no
further repeat copy is available.
Select [Continue] to print
scanned pages. Select [Cancel]
to cancel the job.
An error has occurred during
broadcast transmission. The job
is canceled. Select [End].
Corrective Actions
System stamp is set up.
Banner print cannot be carried
out.
Job is canceled. Select [End].
Set machine time to match the
server's time.
Check the domain name.
Check the host name.
Check the connection status
with the server.
Check the connection status
with the server.
If the selected paper is not
changed and [Continue] is
selected, duplex is released.
Select the available paper.
Select [Continue] to print.
19-44
Reference
Page
—
—
—
Reference
Page
―
page 3-8
—
—
—
—
—