Check The Usb Drive Information; Removing Usb Drive - Kyocera Taskalfa Pro 15000c Operation Manual

Box Function > Operating using USB Drive
Global Navigation
Functions
Configure the settings
for color selection and
document name when
storing the document
in the USB drive.

Check the USB Drive Information

1
2

Removing USB Drive

IMPORTANT
Be sure to follow the proper procedure to avoid damaging the data or USB drive.
1
2
Function
File Format
Job Finish Notice
File Separation
Text Stamp
Bates Stamp
Contrast
Skip Blank Page
Long Original
In the USB Drive screen, select [USB Info].
Once you confirm the information, select [Close].
Display the screen.
[Home] key > [USB Drive]
Select [Remove USB].
Select [OK], and remove the USB drive after "USB Drive can be safely removed." is displayed.
NOTE
USB drive can also be removed after checking the status of the device.
Device Status (page 14-13)
Description
Specify the image file format. Image quality level
can also be adjusted.
Sends E-mail notice when a job is complete. It is
also available that send a notice when a job is
interrupted.
Creates several files by dividing scanned original
data page by specified number of pages, and
sends the files.
You can add a text stamp on the documents.
You can add a bates stamp on the documents.
You can adjust the contrast between light and
dark areas of the image.
When there are blank pages in a scanned
document, this function skips the blank pages
and stores only pages that are not blank.
Reads long-sized original documents using a
document processor.
12-27
Reference
page
page 13-49
page 13-45
page 13-53
page 13-37
page 13-41
page 13-15
page 13-47
page 13-55