One-Touch Key; Printer - Kyocera Taskalfa Pro 15000c Operation Manual

Setting up from System Menu > Function Settings

One-Touch Key

[System Menu/Counter] key > [Function Settings] > [One-Touch Key]
Item
Add/Edit One-Touch
Key
Edit Restriction

Printer

[System Menu/Counter] key > [Function Settings] > [Printer]
Item
Emulation
KPDL Error Report
Color Setting
EcoPrint
Ink Save Level (EcoPrint)
Configure settings for One Touch Key.
Adding a Destination on One Touch Key (One Touch Key) (page 3-42)
Restrict editing of the One Touch Key. If you selected [Administrator Only], you can only
edit the One Touch Key by logging in with administrator privileges.
Value: Off, Administrator Only
Select the emulation for operating this machine by commands oriented to other types
of printers.
Value: PCL6, KPDL, KPDL (Auto)
NOTE
• When you have selected [KPDL (Auto)], set "Alt Emulation", too.
• When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error Report", too.
When an error has occurred during printing in KPDL emulation mode, set whether or
not the error report is output.
Value: Off, On
You can choose whether reports are printed in color or black and white.
Value: Color, Black & White
EcoPrint conserves ink when printing. This is recommended for test copies where
faded printing is not a problem.
Value: Off, On
Select the default Ink Save Level (EcoPrint).
Value: 1 (Lower) to 5 (Higher)
NOTE
Raising the level reduces ink consumption, but image quality falls.
Description
Description
15-41