Kyocera Taskalfa Pro 15000c Operation Manual page 544

Troubleshooting > Other Trouble
M
Message
Machine failure.
Maximum number of
scanned pages.
Memory is full.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 15-23)
P
Message
Paper cannot be sent
to any tray.
Paper jam.
Paper left.
Preparing to print.
Checkpoints
—
Is the acceptable scanning
count exceeded?
*1
—
—
Checkpoints
Have you selected a size or type
of paper, and paper output that
is not available?
―
—
—
Corrective Actions
Internal error has occurred.
Make a note of the error code
displayed on the screen. Call
service.
Cannot scan pages any more.
Follow the instructions on the
screen.
The memory is full and the job
cannot be continued. Select
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Select
[Cancel] to cancel the job.
The process cannot be
performed due to insufficient
memory. If only [End] is
available, select [End]. The job
will be canceled.
When insufficient memory
occurred frequently, contact
your dealer or service
representative.
Corrective Actions
Check the size and type of
paper that is available on the
paper output. Change the paper
and configure paper feeding
settings, and then specify the
paper output.
If a paper jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed paper.
Remove paper from the
document finisher.
The machine is under the
adjustment to maintain its
quality. Please wait.
19-49
Reference
Page
—
—
—
—
Reference
Page
—
page 19-21
—
—