Using Custom Paper > Setting from the Operation Panel
Correcting Paper Skew
To feed paper correctly, the amount of play of the paper (amount of resistance play) in the main unit resistance roller
must be adjusted. Adjust this setting if the leading edge of the paper folds (skewed feeding) or creases appear.
IMPORTANT
If the amount of resistance play is too small, the paper will skew. If the amount of resistance play is too large,
creases will appear in the output.
NOTE
To adjust skewed feeding, load A4-R size or larger paper in the paper source.
1
2
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Paper Feeding] > "Cassette Settings"
[Cassette 1 (to 8) Settings] > [Manual]
"Adjustment Items" [Print Chart/Help] > [Print]
A test chart is printed.
CT1
FR
LA1
PT1
MS1
BK
LA2
MS2
6-9
CT2
PT2