Kyocera Taskalfa Pro 15000c Operation Manual page 251

Printing from PC > Printing from PC
IMPORTANT
Remove the paper when banner printing finishes, or when you are not using the banner tray.
3
Loop the banner paper back and place the end on the paper support.
4
Adjust the paper width guides to the width of the paper.
IMPORTANT
If there is a gap between the paper and the paper width guides, readjust the guides
to fit the paper in order to prevent skewed feeding and paper jams.
5
Adjust the paper width guides on the banner tray to the same width as the paper width
guides on the multipurpose tray and lock.
9-14