Precautions When Storing Paper - Kyocera Taskalfa Pro 15000c Operation Manual

Hide thumbs Also See for Taskalfa Pro 15000c:

Table of Contents

Paper Handling > Precautions on Paper

Precautions when Storing Paper

Since the paper is made of dietary fiber, it is sensitive to moisture and humidity. Therefore, if the environmental

conditions of the warehouse and the printing location are different, it is necessary to transport the paper to the printing

place beforehand and to familiarize it to the temperature. Due to sudden changes in temperature and humidity, paper

causes various changes as if it were alive. It is a symptom that is said to be "paper habit", and there are three kinds of

"Curl", "Wave Edge", and "Tight Edge" in roughly divided.

If paper is set in the cassette or multipurpose tray while "paper habit" is occurring, "wrinkle" or "paper jam", "misjudge" in

which printing is misaligned, it may occur the image distortion due to rubbing against the head.

A state in which the paper warps in the same direction as either

the front or back of the paper is bent

The end of the paper sucked up moisture in the atmosphere and

stretched and waved

The phenomenon that the four corners of the paper are rounded

and the center is recessed by releasing moisture from the

periphery of the paper into the outside air

There is also "Inverted tight edge" where the center of the paper

gets higher.