Default Settings Of The Machine; Setting Date And Time - Kyocera Taskalfa Pro 15000c Operation Manual

Installing and Setting up the Machine > Default Settings of the Machine

Default Settings of the Machine

The default settings of the machine can be changed in System Menu. Before using this machine, configure such settings
as date and time, network configuration, and energy saving functions as needed.
NOTE
For settings that are configurable from System Menu, refer to the following:
Setting up from System Menu (page 15-1)

Setting Date and Time

Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
NOTE
• To make changes after this initial configuration, refer to the following:
Date/Time (page 15-6)
• The correct time can be periodically set by obtaining the time from the network time server.
Command Center RX User Guide
1
2
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Date/Time]
Configure the settings.
[Date and Time] > [Date Format] > [Time Zone]
Item
Date and Time
Date Format
Time Zone
Set the date and time for the location where you use the machine.
If you perform Send as E-mail, the date and time set here will be
displayed on the header.
Value: Year (2000-2035), Month (1-12), Day (1-31),
Hour (00-23), Min. (00-59), Second (00-59)
Select the display format of year, month, and date. The year is
displayed in Western notation.
Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Set the time difference from GMT. Choose the nearest listed
location from the list. If you select a region that utilizes summer
time, configure settings for summer time.
3-8
Description