Bates Stamp - Kyocera Taskalfa Pro 15000c Operation Manual

Using Various Functions > About Functions

Bates Stamp

Layout/Edit
Copy
You can add a bates stamp on the documents.
Copying/Printing
NOTE
This cannot be set when Bates Stamp is set in the system settings.
Printing Jobs (page 15-58)
Item
Off
On Stamp
Date Format
Numbering Default
Position
Advanced
Send
Setup
Date, User Name, Serial
Number, Numbering, Text 1,
Text 2
YYYY/DD/MM, DD/MM/YYYY,
YYYY/MM/DD
1 to 9999999
Position Top Left, Top Middle, Top
Right, Middle Left, Center,
Middle Right, Bottom Left,
Bottom Middle, Bottom Right
Nudge Top/Bottom: -10 to +10 mm
Left/Right: -10 to +10 mm
Back Same as Front Page, Mirror
Page Front Page
Functions
Custom
Box
Value
Set the stamp to be printed.
When [Text 1] or [Text 2] is selected, select
[Change] below and enter the text string.
If you selected [Date], select [Date Format]
and select [MM/DD/YYYY], [DD/MM/YYYY],
or [YYYY/MM/DD] to set the date format.
To set [Numbering], select [Numbering
Default] and set the starting sequence
number (1 to 9999999). If you select [Fixed
Digit Number] > [On], you can set the
number of digits of the serial number (1 to 7
digits).
Set the format of the date.
This appears if you selected [Date] in
"Stamp".
Set the starting consecutive number.
To set the number of digits (1 to 7) of the
consecutive number, select [Fixed Digit
Number] > [On].
This appears if you selected [Numbering] in
"Stamp".
Set the stamp position to be printed.
Select [Position] and select the bates stamp
position.
You can specify the detailed stamp position
using numeric values, and set the stamp
position when a stamp is placed on the back
side of the paper in duplex printing.
Fine adjust the position of the stamp.
Set whether the stamp will be placed in the
same position as the front side.
13-41
Functions
USB
Memory
Description