Kyocera Taskalfa Pro 15000c Operation Manual page 217

Paper Handling > Loading Paper
4
5
6
7
8
Load the cardstock.
IMPORTANT
Load the cardstock with the print side facing up.
Take the grip of the paper width guides with your fingers, and
adjust the paper width guides to the paper size.
IMPORTANT
Load the cardstocks so that the edges of the paper do not bend.
Tightly fit the paper length guide to the loaded cardstock, and
then re-lock the paper length guide again.
CAUTION
Adjust the paper guide so that there are no gaps between the guide and the paper.
Any part of the paper that is out of place may fold, contact the print head, and cause
print head damage, skewed feeding, or a paper jam.
Push the paper tray fully in until it clicks.
NOTE
If the top paper holders of the paper feeder are pushed in at an angle, they may not return to
their original positions. Return them to their original positions by hand.
Display the screen.
[System Menu/Counter] key > [Device Settings] > [Paper Feeding] > [Cassette 5 Settings]
7-34