Remote Printing - Kyocera Taskalfa Pro 15000c Operation Manual

Setting up from System Menu > Function Settings
Item
Resolution
KIR
Printing Job Terminator

Remote Printing

[System Menu/Counter] key > [Function Settings] > [Remote Printing]
Item
Remote Printing
Set the resolution used for printing.
Value: 600 dpi, 1200 dpi
NOTE
Settings that are received from the printer driver have priority over the operation
panel settings.
Select the default KIR (smoothing) setting.
Value: Off, On
You can select the condition which regarded as a job termination if the print job could
not be processed until the end due to your environment and the other reason.
Value:
EOJ (End of Job): The command recognized as a termination of the job data is
regarded as one job until it is detected.
End of Network Session: The data included in a network session at network
connection is regarded as one job.
UEL (Universal Exit Language): The UEL included in the termination of the job data
is regarded as one job until it is detected.
Select whether to prohibit printing that is performed without operating the machine. When
[Prohibit] is selected, a document that has been stored in the document box from the
printer driver can be printed from the machine. This prevents another person from seeing
that document.
Value: Prohibit, Permit
NOTE
If [Prohibit] is selected, printing and storing using Quick Copy and Proof and Hold functions are
disabled.
Description
Description
15-43