Environmental Conditions; Obligations Of The Operating Company; Obligations Of Personnel; Grid Connection - Fronius TPS/i Robotics TWIN Push Operating Instructions Manual

The device is intended exclusively for the welding process specified on the rating plate.
Utilization for any other purpose, or in any other manner, shall be deemed to be "not in ac-
cordance with the intended purpose." The manufacturer is not responsible for any damage
resulting from improper use.
Proper use also means
-
-
-
Never use the device for the following applications:
-
-
-
The device is designed for operation in industry and business. The manufacture shall not
be liable for any damage resulting from use in a living area.
The manufacture shall also not be liable for faulty or incorrect work results.
Environmental Operation or storage of the device outside the stipulated area will be deemed as not in ac-
Conditions
cordance with the intended purpose. The manufacturer accepts no liability for any damage
resulting from improper use.
Temperature range of the ambient air:
-
-
Relative humidity:
-
-
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6561 ft. 8.16 in.)
Obligations of the
The operating company must only allow persons to work with the device if they
Operating Com-
-
pany
-
-
The safety-conscious work of the personnel must be checked regularly.
Obligations of All persons who are assigned to work with the device must do the following before begin-
Personnel ning the work:
-
-
Before leaving the workplace, ensure that no personal injury or property damage can occur
in one's absence.

Grid Connection

Devices with a high output can influence the energy quality of the grid due to their current
consumption.
8
Completely reading and obeying all instructions in the Operating Instructions
Completely reading and obeying all safety instructions and danger notices
Carrying out all the specified inspection and servicing work
Thawing pipes
Charging batteries
Starting motors
During operation: -10°C to +40°C (14°F to 104°F)
During transport and storage: -20°C to +55°C (-4°F to 131°F)
Up to 50% at 40°C (104°F)
Up to 90% at 20°C (68°F)
Are familiar with the basic occupational safety and accident prevention regulations
and are trained in handling the device
Have read and understood these Operating Instructions, especially the section "Safe-
ty Rules," and have confirmed this with their signature
Are trained according to the requirements for the work results
Follow the basic regulations for occupational safety and accident prevention
Read these Operating Instructions, especially the section "Safety Rules," and confirm
that they have understood and will follow them by signing