Warning Notices On The Device - Fronius TPS/i Robotics TWIN Push Operating Instructions Manual

Warning notices
The wirefeeder has safety symbols and a rating plate fitted. These safety symbols and the
on the device rating plate must not be removed or painted over. The safety symbols warn against oper-
ating the equipment incorrectly, as this may result in serious injury and damage to property.
Do not use the functions described here until you have fully read and understood the fol-
lowing documents:
-
-
Welding is dangerous. To ensure that this device can be used correctly and safely, the fol-
lowing basic requirements must be met:
-
-
-
28
These Operating Instructions
All system component Operating Instructions, especially the safety rules
Adequate welding qualifications
Appropriate protective equipment
Keep unauthorized people away from the wirefeeder and the welding process
Part No.:
www.fronius.com
Ser.No.:
IEC 60 974-5/-10 Cl.A
U 60 V I
11 11
U 24 V I
12 12
1 - 30 m/min 39 - 118 ipm
I 360A/100% 450A/60% 500A/40%
2
Caution: Parts may be at welding
voltage
Attention: Les pièces peuvent être
à la tension de soudage
IP 23
1.2 A
0.5 A
40,0006,3035