Twin Welding Processes; Twin Welding Processes - Overview; Symbols - Fronius TPS/i Robotics TWIN Push Operating Instructions Manual

TWIN Welding Processes

TWIN welding
processes - over-
view
* activation required
IMPORTANT! There are no TWIN characteristics available for Pulse or Standard welding
processes.
Welding process combinations using Pulse or Standard are not recommended!

Symbols

The following symbols are used in the descriptions of the welding process combination op-
tions below:
I
I
44
Lead wire electrode
(= lead power source)
(Pulse*/Standard*/PMC*/LSC*)
Trail wire electrode
Lead wire electrode
Active PMC arc with droplet transfer
Inactive PMC arc (no droplet transfer)
Active PCS arc
Welding current of the lead power source
L
Welding current of the trail power source
T
Welding direction
Trail wire electrode
(= trail power source)
Welding direction
PMC TWIN PMC TWIN
PCS TWIN PCS TWIN
Single wire -
- Single wire
(Pulse*/Standard*/PMC*/LSC*)