Troubleshooting; Safety - Fronius TPS/i Robotics TWIN Push Operating Instructions Manual

Troubleshooting

Safety

Danger from work that is not carried out properly.
Serious personal injury and damage to property may result.
► All work described below may only be performed by trained specialist personnel.
► Read and understand this document in full.
► Read and understand all the Operating Instructions for the system components, espe-
Danger from electrical current.
An electric shock can be fatal.
► Switch the power switch on the power source to - O -.
► Disconnect the power source from the grid.
► Ensure that the power source remains disconnected from the grid until all work is com-
► After opening the device, use a suitable measuring tool to ensure that electrically
Danger due to hot system components.
Serious personal injury and damage to property may result.
► Before starting work, allow all hot system components to cool to room temperature
Hot system components include:
-
-
-
Troubleshooting Make a note of the serial number and configuration of the device, and provide the service
team with a detailed error description if:
-
-
Power source not working
Power source switched on, displays do not illuminate
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
WARNING!
cially the safety rules, in full.
WARNING!
plete.
charged components (e.g. capacitors) are discharged.
CAUTION!
(+25 °C, +77 °F), for example:
Coolant
Water-cooled system components
Wirefeeder drive motor
Errors occur that are not covered in this document
The troubleshooting measures provided in this document are unsuccessful
Grid lead damaged or broken, grid plug not inserted
Check grid lead, if necessary insert grid plug
Grid socket or grid plug faulty
Replace faulty parts
Grid fuse
Replace grid fuse
89