Wf 30I R /Twin; Device Concept; Intended Use - Fronius TPS/i Robotics TWIN Push Operating Instructions Manual

WF 30i R /TWIN

Device concept

Intended Use

The device is intended exclusively for wirefeeding in automated MIG/MAG welding in com-
bination with Fronius system components. Any other use does not constitute proper use.
The manufacturer accepts no liability for any damage resulting from improper use.
Proper use also means:
-
-
-
Reading these Operating Instructions in their entirety
Following all instructions and safety rules in these Operating Instructions
Carrying out all the specified inspection and servicing work
The wirefeeder WF 30i R /TWIN has been
specially designed for automated applicati-
ons in connection with a MIG/MAG TWIN
welding process.
The standard 4-roller drive offers excellent
wire feeding properties.
27