Safety-Installation And Commissioning; Safety - Fronius TPS/i Robotics TWIN Push Operating Instructions Manual

Safety—Installation and Commissioning

Safety

Incorrect operation and incorrectly performed work can cause serious injury and
damage to property.
► All work listed in this document may only be performed by trained specialist personnel.
► All functions described in this document may only be used by trained specialist person-
► All work and functions described must only be performed and used once the following
► this document
► All system component Operating Instructions, especially the safety rules
An electric shock can be fatal.
Before starting the described work:
► Switch the power switch on the power source to - O -
► Disconnect the power source from the grid
► Ensure that the power source remains disconnected from the grid until all work is com-
Danger of severe injury and damage to property due to falling objects.
Check all screw connections listed below:
► for tight fastening after installation
► for tight fastening after unusual operating situations (example: crash)
► for tight fastening at regular intervals
Improper connections can cause personal injury and/or damage to equipment.
► All cables, leads, and hosepacks must be securely connected, undamaged, correctly
WARNING!
nel.
documents have been read and understood in full:
WARNING!
plete
WARNING!
CAUTION!
insulated, and adequately sized.
63