Sic-4Gswf - HPE FlexNetwork MSR Series Manual

Table of Contents

Advertisement

small-sized enterprise network. You can use it to connect PCs and network devices inside the
network. The SIC-4GW-PoE interface module can supply power to PDs through PoE.
Interface specifications
Table 4 Interface specifications
Item
Connector
Interface type
Number of connectors
Transmission distance
Operating mode
Interface LEDs
Figure 5 SIC-4GSW
Figure 6 SIC-4GSW-PoE
Table 5 LED description
LED
Off
Steady green
Flashing green
Steady yellow
Flashing yellow
Interface cables and connection methods
For more information about the Ethernet interface cables and connection methods, see
interface."

SIC-4GSWF

Introduction
The 4-port 100/1000 Mbps Ethernet Layer 2/Layer 3 SIC interface module SIC-4GSWF provides
four fiber ports. It is designed for switching/routing integrated routers on a small-sized enterprise
network. You can use it to connect network devices inside the network.
The interface module has the following features:
Specification
RJ-45
MDI/MDIX
4
100 m (328.08 ft) over category-5 twisted pair cables (both
crossover and straight-through)
10/100/1000 Mbps autosensing, full/half duplex
Description
No link is present.
A 1000 Mbps link is present.
The interface is sending or receiving data at 1000 Mbps.
A 10/100 Mbps link is present.
The interface is sending or receiving data at 10/100 Mbps.
3
"Ethernet

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexNetwork MSR Series and is the answer not in the manual?

Table of Contents