Sic-1Gec-V2/Sic-1Gec-H3 - HPE FlexNetwork MSR Series Manual

Item
Connector
Interface standard
Operating mode
Interface LEDs
Figure 9 SIC-1FEF panel
Table 11 LED description
LED
LINK/ACT
Fiber ports, optical fibers, and the connection methods
For more information about fiber ports, optical fibers, and the connection methods, see

SIC-1GEC-V2/SIC-1GEC-H3

Introduction
The 1-port
SIC-1GEC-V2/SIC-1GEC-H3 provides the following features:
•
Receipt, transmission and processing of GE data stream.
•
CE copper and fiber interface access.
•
1000/100/10 Mbps on the copper interface.
•
1000 Mbps on the fiber interface.
Interface specifications
Table 12 Interface specifications
Item
Connector
Interface type
Frame format
Operating mode
Specification
SFP/LC
802.3, 802.3u, and 802.3ab
100 Mbps, full duplex
Status
Off
Steady green
Flashing green
Steady yellow
10/100/1000 Mbps
Description
No link is present.
A link is present.
Data is being received and transmitted at 100 Mbps.
Information detection failed.
copper and fiber
Specification
RJ-45
MDI
•
Ethernet_II
•
Ethernet_SNAP
•
IEEE 802.2
•
IEEE 802.3
10/100/1000 Mbps autosensing, full/half duplex
6
"Fiber
Ethernet interface
port."
module