Operation Of The Rotary Switch At The Wireless Receiver "R-Con - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Installation & initial operation "R-Tronic" + "R-Con"
4.5.2 Operation of the rotary switches at the wireless receiver
All settings at the wireless receiver "R-Con" are carried out with the help of
rotary switches which are recessed into the casing of the module to prevent
tampering.
It is recommended to carry out all settings (see below) at the rotary switches
with the help of a slot screwdriver (approx. profile 4-5 mm) as the operating
elements feature a corresponding notch.
(Illustration 13)
24