Installation Of The Room Thermostat With Actuator; Operation; Maintenance; Removal And Disposal - oventrop Unibox T vario Operating Instructions Manual

Operation

(2)
Remote control
4. Fit the cover to the "Unibox T vario".
The cover is not included in the
extent of supply and has to be
ordered separately (see 4 on page
22).
7.5 Installation of the room
thermostat with actuator
1. After having completed all building work,
remove the protection cover of the "Unibox
T vario".
2. Remove the protection cap.
3. Screw the actuator (see Illust. 9 on page
26 (1)) onto the valve. Feed the cable
through the hole in the wall box unit (see
6.1 on page 23).
For further information please refer
to the operating instructions sup-
plied with the actuator.
1
Illust. 9: Installation of the room thermostat
with actuator
(1) Actuator
(2) Room thermostat
4. Install the room thermostat according to
26
the operating instructions supplied with the
product.
5. Fit the cover to the "Unibox T vario".
8. Operation
Set the room temperature at the thermostat
with remote control/room thermostat.
9.

Maintenance

Regularly check the tightness and function of
the product and its connection points as part of
system maintenance.

10. Removal and disposal

10.1 Disposal

NOTICE
Risk of environmental pollution
2
Incorrect disposal (for instance with
standard waste) may lead to environ-
mental damage.
f Dispose of packaging material in
f Dispose of the components appro-
If no return or disposal agreement has been
made, dispose of the product yourself.
f If possible, recycle the components.
f Dispose of components which cannot be
recycled according to local regulations.
Disposal with standard waste is not per-
mitted.
Unibox T vario
The cover is not included in the
extent of supply and has to be
ordered separately (see 4 on page
22).
an environmentally friendly manner.
priately.
102272380-V01.02.2020