Default View Display; Offset Temperature Control "R-Tronic - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Operation & menu structure

5.4.4 Default view display

Here you may define the value that will be displayed in large size. The menu is
reached via SETTINGS X DISPLAY and offer the following selection options:
• ACTUAL VALUE
• SET VALUE
• HUMIDITY in % RH
NOTE
The air humidity of the room is permanently measured by the "R-Tronic"
models "RTF B" and "RTFC K" and is displayed in percent on the right hand
side of the text line at the bottom of the display. Please observe the informa-
tion provided in chapter 9.
• CO2 CONCENTRATION in PPM
• ALTERNATING
5.4.5 OFFSET-TEMPERATURE control "R-Tronic"
Temperature measurement of the wireless thermostat can be increased or re-
duced by 3 degrees Celsius in the submenu CONTROL. This might become
necessary if the temperature control is impaired by environmental influences
such as cold outer walls.
To do so, select SETTINGS X CONTROL X OFFSET TEMPERATURE via the
Menu-button and store the required value.
70
(Current room temperature in °C)
(Required temperature in °C)
(option "R-Tronic RTF B / RTFC K" only)
(Display option "R-Tronic RTFC K" only)
(Display alternates between
ACTUAL VALUE, SET VALUE, HUMIDITY,
CO2 CONCENTRATION; Display option
"R-Tronic RTFC K" only)
"R-Tronic" + "R-Con"