Menu "Settings; Installation (Radio Communication Between "R-Tronic" And "R-Con") - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Operation & menu structure
5.4

Menu "Settings"

Menu structure:
MAIN MENU
TEMPERATURES
TIME PROFILE
Connection of the "R-Tronic" to the wireless receiver is carried out via the
submenu SETTINGS and global specifications for the operation of your device
are made via this menu.
5.4.1 Installation
(radio communication between "R-Tronic" and "R-Con")
This function has already been mentioned in chapter 4, paragraph 6. The radio
communication between a wireless thermostat and a channel of the wireless
receiver "R-Con" in created via this setting routine (TEACH IN).
The radio communication can be terminated via the command TEACH OUT.
"Teaching out" is only possible if at least one channel of the wireless receiver
has been "teached in" before.
NOTE
The function DELETE SLAVE that is part of the menu INSTALLATION must
only be used if the channel cannot be "teached out" (for instance no access
to the wireless receiver because of error or defect). On principle, the radio
communication between the "R-Tronic" and a channel of the wireless re-
ceiver must only be terminated via the selection menu TEACH OUT.
68
FUNCTIONS SETTINGS
INSTALLATION
DATE / TIME
LANGUAGE
DISPLAY
CONTROL
SUMMER-/WINTERTIME
BACKLIGHT
ROOM DESIGNATION
FACTORY SETTINGS
RESTART
"R-Tronic" + "R-Con"
(Illustration 68)
INFORMATION