Installation With Table Stand And Mains Adaptor ("Rtfc K") - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Installation & initial operation
4.4 Installation with table stand and mains adaptor
("RTFC K")
CAUTION
Risk of fire due to overcharging of the batteries!
There is a risk of overcharging of the batteries if the "R-Tronic" is
equipped with batteries and is connected to the 230 V network via
the table stand (types "RT B" and "RTF B").
 The wireless thermostat must never be equipped with batteries
when using the mains adaptor with table stand.
1. Plug the mains adaptor which is connected to the table stand into an
earthed socket (100-240 V ~/50-60 Hz).
2. Insert the "R-Tronic" into the table stand from the top.
"R-Tronic RTFC K"
Table stand
(option for
"RT B"/"RTF B",
remove batteries!)
The "R-Tronic" is now ready for the "teach in" process (see paragraph 4.6).
X
NOTE
The "R-Tronic" is removed by pulling it vertically upward out of the table
stand.
22
"R-Tronic" + "R-Con"
(Illustration 10)
Mains adaptor