Standard Heating Profiles And Temperature Setting; Switching Between Different Heating Profiles - oventrop R-Tronic RT B Installation And Operating Instructions Manual

"R-Tronic" + "R-Con"
4.8 Standard heating profiles and temperature setting
When putting the "R-Tronic" into operation, the standard profile will always
be active and adjust the room temperature to a constant value of 20 °C (con-
tinuous heating operation = PROFILE ON). The activity of the standard profile
is displayed by a continuous line below the time line across the complete 24-
hour scale (MANU will be displayed):
You may switch between the different heating profiles via the Auto/Manu-button.
PROFILE ON
= 20 °C
4.8.1 Switching between different heating profiles
For the sake of energy saving it might be useful to switch the standard setting
from PROFILE ON to PROFILE OFF. As a result, the "R-Tronic" will reduce the
constant room temperature from 20 °C to 17 °C. This modification should be
carried out if the room does not need to be heated continuously, for instance
if it is temporarily unoccupied.
1. Press the Auto/Manu-button until PROFILE OFF will appear on the display.
The "R-Tronic" will reduce the temperature to a constant value of 17 °C
X
and the continuous line below the timeline will no longer be displayed
(constant setback temperature). The operating mode MANU remains
displayed.
Installation & initial operation
(Illustration 46)
Auto/Manu-button
53