oventrop R-Tronic RT B Installation And Operating Instructions Manual page 34

Installation & initial operation
Cabling of the wireless receiver with the pump
Connect the pump of the heating water circuit working with a supply voltage
of 230 V to the wireless receiver.
1. Connect the L conductor of the 230 V network to terminal screw 1 of the
logic module.
2. Connect the L input of the pump to terminal screw 2 of the logic module.
3. Connect the N conductor of the 230 V network to the N input of the
pump.
The pump can now be switched via the wireless receiver.
X
NOTICE
Danger of damage to property!
Incorrect connection of the lines to the
pump may lead to damage to property.
Cabling of the pump must be carried out
with due consideration of the operating
instructions of the pump.
Please contact the pump manufacturer in
case of uncertainties.
34
L
230 V
N
"R-Tronic" + "R-Con"
(Illustration 23)