Wall Attachment Of Fixing Plate "R-Tronic Rt B / Rtf B" (Battery Operation) - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Installation & initial operation
4.2 Wall attachment of the fixing plate
"R-Tronic RT B / RTF B" (battery operation)
For the models "R-Tronic RT B" and "R-Tronic RTF B", power is either sup-
plied by batteries, a flush-mounted power pack or a mains adaptor with table
stand (available as accessories). The "R-Tronic RTFC K" is always operated
with a flush-mounted power pack or a mains adaptor.
If the "R-Tronic" models "RT B" and "RTF B" shall be used for battery opera-
tion, i.e. for standard operation, please proceed as follows:
1. Insert two AA 1.5 Mignon batteries into the battery case. The position of
the batteries is specified by the markings +/-.
2. Screw the supplied fixing plate horizontally onto the wall.
3. Insert the wireless thermostat into the fixing plate from the top.

Fixing plate
The "R-Tronic" is now ready for the "teach in" process (see paragraph 4.6).
X
20
"R-Tronic" + "R-Con"

(Illustration 7)
(Illustration 8)
"R-Tronic
RT B
RTF B"
(battery
operation)