Product Description; Summary - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Product description

3. Product description
3.1

Summary

The wireless thermostat "R-Tronic" and wireless receiver "R-Con" are used for
the programmable temperature control of rooms with surface heating circuits.
The radio communication between the "R-Tronic" and "R-Con" is wireless.
One wireless thermostat may communicate with the wireless receiver via a
maximum of 8 channels (mains operation).
Depending on the model, the "R-Tronic" is powered by two batteries, a flush-
mounted power pack or a mains adaptor (100-240 V ~/50-60 Hz). The wireless
thermostats requires a 230 V alternating voltage.
"R-Tronic" models:
• "R-Tronic RT B":
Temperature display and programmable temperature control, battery
operation by default, power supply can also be carried out via a flush-
mounted power pack or a mains adaptor which are available as optional
accessory (item no. 1150692 or 94).
• "R-Tronic RTF B":
Temperature display, programmable temperature control and air
humidity measurement, battery operation by default, power supply can
also be carried out via a flush-mounted power pack or a mains adaptor
which are available as optional accessory (item no. 1150692 or 94).
• "R-Tronic RTFC K":
Temperature display, programmable temperature control and air
humidity and CO2 measurement powered by a flush-mounted power
pack or a mains adaptor by default.
• "R-Con" 8 channel wireless receiver with logic module:
Control of 8 independent heating circuits (a maximum of 32 actuators
230 V or 24 V can be connected to the distributor/collector for surface
heating, a maximum of 32 heating circuits may thus be controlled). The
number of channels can be increased by extending the wireless receiver
by further control modules.
Integrated burner logic for heat demand to a boiler.
Integrated pump logic with adjustable lead time and follow-up time.
Depending on the spatial conditions, an antenna extension for
improvement of reception and/or a repeater (item no. 1153060 / 1150699)
for amplification of the "R-Tronic" radio signals are used.
10
"R-Tronic" + "R-Con"