Menu "Room Climate" (Only "R-Tronic Rtfc K") - oventrop R-Tronic RT B Installation And Operating Instructions Manual

Operation & menu structure
5.5

Menu "Room climate" (only "R-Tronic RTFC K")

In comparison with the model "RT B" and "RTF B", the "R-Tronic RTFC K"
features an a CO2 measured value detection. The integrated sensor continu-
ously measures the carbon dioxide content (CO2 value) in the ambient air and
it will be displayed when the defi ned value is exceeded. Excessive CO2 values
have a negative infl uence on the power of concentration and lead to tiredness.
NOTE
The display of the "R-Tronic RTFC K" shows the CO2 values in PPM. A
PPM value of 1,000 is, for instance, equivalent to 1,000 parts (parts per
million) of CO2 per one million parts of room air or a CO2 content of 0.1%.
For comparison: The average CO2 content of outside air amounts to 400
PPM or 0.04%.
The display of the "R-Tronic RTFC K" shows the CO2 content in the ambient air:
Values below 1,000 PPM are considered as standard value for a
"good" room climate. For this reason, the following symbol will
be displayed if this value is exceeded:
This is a recommendation for room ventilation (open window).
The threshold above which the symbol will be displayed can be modifi ed via the
menu ROOM CLIMATE X CO2 ALERT THRESHOLD. This way you may deter-
mine the CO2 level at which the room ventilation recommendation will be displayed.
1. Go to the MAIN MENU. After having pressed the Menu-button you will
reach the submenu TIME PROFILE. Turn the Menu-button to the right
and confi rm the selection ROOM CLIMATE and the following selection
CO2 ALERT THRESHOLD.
Select a PPM value between 450 and 2,000 and confi rm the selection
2.
SETTING. The message SAVED will shortly appear on the display.
From now on, a recommendation for room ventilation will be shown on
X
the "R-Tronic" display as soon as your individual CO2 threshold is
exceeded. The symbol will no longer be displayed as soon as the PPM
value will have dropped to a value lying 10% below the set threshold.
Example: PPM = 1,000, symbol will disappear at a value < 900 PPM
74
"R-Tronic" + "R-Con"
(Illustration 70)