Table of Contents
Advertisement
Available languages
Available languages
Thermo Fisher Scientific
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Foil Clamp
e foil clamp is used for foils or thin specimens.
•
To insert the specimen, loosen the three clamping screws [a] slightly
and push the movable jaw [c] sideways against the two springs [b].
•
e specimen is kept in place by the springs [b]; however, its position
can be changed. Turn the three clamping screws [a] to clamp the
specimen tightly against the xed jaw [d].
•
When using an orienting adapter with the instrument, rst insert
the enclosed graduated ring into the orienting adapter with the pin.
With the graduated ring the orientation in X-/Y-direction is can-
celled.
•
However, it is possible to turn the Z-axis 60° in either direction.
•
en insert the foil clamp.
Note!
According to the various specimens, it might be helpful to use in addition
ermo Fisher Scienti c's sandwich supporting material (Cat. No. 176010)
on the right and left side between specimen and clamping jaw.
[d]
[c]
[b]
Operation Manual HM335S
Operating Instructions
Specimen Clamping
[a]
49
Hide quick links:
Advertisement
Chapters
Table of Contents
