Operating Instructions; Setting Up The Microtome - Thermo Scientific Microm HM355S Operation Manual

Setting up the
Microtome
Thermo Fisher Scientific
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Microtome Thermo Scientific Microm HM355S
Pollution Degree
Overvoltage Category
Sound Pressure
Dimensions
Weight
Chapter 3

Operating Instructions

Cut through the bands around the carton.
• Open the carton.
• Remove the accessories.
• On the lower front and rear side of the instrument, there are two
recessed grip to lift and carry the microtome.
Note!
Do not use the hand wheel handles to lift or carry the instrument.
• Lift the microtome out of the carton.
• Choose a place for the microtome where the mains switch can be
reached at all times.
• Place the microtome on a stable and vibration free table, as sectioning
can be in uenced by nearby instruments which generate vibrations.
• Hand wheel must be free and accessible in a comfortable way.
• Remove the separately packed section waste tray and install it at the
base plate from the front side.
• Remove the separately packed cover plate and place it on the top of
the microtome.
• In the rear part at the bottom of the instrument, there are sliding
feed for an easy moving of the microtome.
• Slightly lift the base at the front end only and slide the microtome
into place.
Note!
Remove the section waste tray to move or carry the instrument.
waste tray can be pulled out of its proper position.
Operating Instructions

Setting up the Microtome

2
II
42 dB(A)
410 mm x 520 mm x 280 mm
(wide/deep/high)
31 kg
e section
Operation Manual HM335S
17