Insert For Round Specimens, V-Insert And V-Distance Piece - Thermo Scientific Microm HM355S Operation Manual

Operating Instructions
Specimen Clamping
Insert for Round Specimens,
V-Insert and
V-Distance Piece
Operation Manual HM335S
48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Note!
To exchange the movable clamping jaw [c], unscrew the clamping screw [a]
to remove the jaw and replace it.
To cut round specimens, the insert for round specimens with de ned
diameters of 6, 15, 19 and 25 mm (special sizes on request) or the V-
insert can be clamped into the standard specimen clamp.
• e pin [d], which ts into the lower clamping jaws [c], positions
the insert precisely.
men from the inserts.
B
• To fasten the V-distance piece on the xed jaw of the standard
specimen clamp, the clamping screw must be unscrewed from the
spindle.
• Pull the spindle o the clamp.
• After having inserted the V-distance piece, insert the spindle and the
clamping screw again.
25
e two springs [b] help to remove the speci-
[a]
C
[c]
[d]
[a]
[b]
[c]
[d]
Thermo Fisher Scientific