Standard Specimen Clamp - Thermo Scientific Microm HM355S Operation Manual

Standard Specimen
Thermo Fisher Scientific
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
e unrestricted use of the Macro-UCC is only possible with ER blade
carrier.
Note!
Maximum 68mm x 50mm specimen size can be cut.
MacrO ow-Cassettes are 70-72mm long and should be trimmed to 68 mm
length manually.
e standard specimen clamp is used for rectangular and square para n
and plastic blocks.
Clamp
• Insert the specimen against the xed jaw [b] rst.
• en tighten with the clamping screw [a] to tighten the specimen
via the movable jaw [c].
Note!
For the stability of the specimen, do not let it project too much over the
clamping jaws.
Note!
e standard specimen clamp is equipped with two di erent movable jaws
[c], which are of di erent weight.
for round specimens.
[a]
[b]
[c]
[a]
e lightweight jaw is used with inserts
Operating Instructions
Specimen Clamping
e Para n blocks in
[a]
[b]
[c]
Operation Manual HM335S
47