Conditions For Transportation; Returning The Instrument For Repair Or Routine Maintenance - Thermo Scientific Microm HM355S Operation Manual

Conditions for Transportation

Returning the Instrument
Returning the Instru-
ment for Repair or
Routine Maintenance
Measures for Taking
out of Operation
For Transporting Outside Closed
Buildings, please Observe
the Following Measures
Operation Manual HM335S
68
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 6
Conditions for Transportation
Repair or maintenance works is normally carried out at the site of ins-
tallation. If this is not possible for some speci c reasons, the instrument
can be returned to ermoFisher Scienti c.
found in the front of this instruction manual.
To guarantee a trouble-free function of the instrument after transporta-
tion, please follow the instructions for transportation preparations.
In addition, the conditions for storage and transportation as mentioned
in the Technical Data Sheet (see page 16), must be observed during the
entire transportation.
B
IOHAZARD
Please also note the precautionary measures described in our safety pre-
cautions concerning biological hazards!
• Turn o the mains switch of the instrument.
• Activate the mechanical hand wheel brake.
• Remove knife or blade and store it in a safe place.
• Remove the section waste tray.
• Turn o the mains switch of the instrument.
• Activate the mechanical hand wheel brake.
• Remove knife or blade and store it in a safe place.
• Remove the section waste tray, the operating panel, the
knife/blade carrier and the specimen clamp.
packed separatly.
• To lift the instrument, use the recessed grip on the lower front and
rear side of the instrument.
C !
AUTION
During transport, do not move the instrument by holding the hand
wheel handle. Danger of injury!
e contact address can be
ese parts have to be
Thermo Fisher Scientific