Emergency Stop - Thermo Scientific Microm HM355S Operation Manual

Emergency Stop

Thermo Fisher Scientific
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Note!
Starting the cutting motor drive is not possible when the instrument is
turned o or when the mechanical hand wheel brake is activated.
indicated by a STOP symbol appears in the display. A red LED in the brake
button lights up when the electronic brake is activated.
To stop the sectioning motor immediately, the microtome has an emer-
gency stop device (a second one is available with the optional foot pedal).
W !
ARNING
Only use the emergency stop button in a case of emergency, do not use
it as a brake.
Note!
e hand emergency stop button is placed on the right side of the micro-
tome above the hand wheel.
• Push the red button to stop the motorized cutting drive immediately.
e operating panel display will show "STOP" when the emergency
stop is activated.
• To continue sectioning, pull out the red button.
Note!
e second emergency stop device is integrated into the foot pedal (optional).
• Vigorously step on the foot pedal to immediately stop the moto-
rized cutting drive.
is emergency stop device is activated as long as the foot pedal is being
stepped on. "STOP" is shown on the display of the operating panel, if
the "emergency stop" is activated.
• To continue sectioning, release the foot pedal.
be started again.
Operating Instructions
Display and Key Functions
is is
e cutting drive can
Operation Manual HM335S
25