Adapters For Specimen Clamping; Adapter, Non-Orienting; Adapter, Orienting, Specimen Orientation - Thermo Scientific Microm HM355S Operation Manual

Adapters for
Specimen Clamping

Adapter, non-orienting

Adapter, orienting,
Specimen Orientation
Thermo Fisher Scientific
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
W !
ARNING
W
/ .
is adapter serves for a non-orienting fastening of the specimen clamps
directly onto the cylinder of the instrument.
is adapter serves for an orienting fastening of the specimen clamps.
is allows the specimen to be aligned with the knife/blade.
[b]
To bring the specimen into the desired position, move the clamping
lever [a] towards the front.
is will loosen the specimen clamp and a rotation of 360° on the
cylinder axis (Z-axis) is possible.
With the two orienting screws [b], the specimen clamp can be moved 8°
in each direction on the X-axis and Y-axis.
After having oriented the specimen, turn the lever [a] upwards to x the
specimen clamp in its position before starting sectioning.
Note!
When turning the orienting screws [b] a slight resistance can be felt when
the clamp is aligned parallel with the cutting surface.
Operating Instructions

Adapters for Specimen Clamping

[a]
Operation Manual HM335S
43