Changing The Foil Tape - Thermo Scientific PrintMate A79510100 Operator's Manual

PrintMate A79510100 Issue 2

Changing the Foil Tape

When the Foil Tape has been used up the Touch Panel on PrintMate will display a message stating that the Foil
Tape needs replacing.

Remove the Used Foil Tape

Fit the Foil Tape Roll
Removing the Used Foil Tape
To remove the used Foil Tape:

Open the Print Door and the Waste Spool Access hatch.

Manually turn the Waste Spool to pull the remaining Foil Tape through the instrument.

Remove the full Waste Spool and dispose of according to local regulations.
20