Thermo Scientific Microm HM355S Operation Manual page 35

Operating Instructions
Display and Key Functions
Mode Selection via
Interval Stroke
Single Stroke
Operation Manual HM335S
34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
• Press the menu button [1]
Knob [A]
• Select "Mode" in the menu by pressing the knob [A]
• In the submenu "Mode" select between the four operating modes
with the knob [A].
e selected operating mode is shown in the display on the operating panel.
• Press the MENU button [1]
• In the submenu "Mode" select the function "Interval"
Now a gradual approach between the specimen and the cutting edge is
possible.
START/STOP [7] or knob [C] or the foot pedal (optional) is constantly
pressed.
• Press the MENU button [1]
• In the submenu "Mode" select the function "Single"
• Unlock the lever for the mechanical brake.
• Press twice the START/STOP button [7] or knob [C] or step on
the foot pedal (optional), to release a single cutting cycle.
e cutting drive remains activated as long as either button
Thermo Fisher Scientific