Pc Warranty Transfer; Qtegra Isds Installation; Insert Dvd; Open Windows Explorer - Thermo Scientific iCAP 7000 Series Manual

iCAP 7000 Series ICP-OES Spectrometer
2.9

PC Warranty Transfer

3 Qtegra ISDS Installation

Before you start the installation you need to
have checked the following:
The User account you are loading
the software in is an Administrator
on the PC concerned.
User Account Control Settings
turned off
Firewall is turned off.
You have a software key to install
Qtegra.

3.1 Insert DVD,

Warning - Do not allow the DVD to autostart.

3.2 Open Windows Explorer,

Navigate to the DVD directory " Prerequisites" Directory.

3.3 Load dot Net

Run the "dotNetFX40_full_x86_x64.exe" file and follow the instructions.
This is required to enable Qtegra to install.

3.4 Accept the Licence agreement.

Navigate back to the Root directory for the DVD and run the "Qtegra-iCAP_OES-x.x.xxxx.xx.exe"
file.
This will extract both the Qtegra software and the Sprint valve software (iCAP 7600 only)
Page 7 of 36
If the iCAP system is supplied with a PC purchased
through Thermo Fisher Scientific then the warranty
should be transferred to the customer in the event
that there is a requirement to make a claim.
Please log on to the following website
and enter the required Thermo Fisher Scientific and
customer information
http://www.dell.com/globaltagtransfer
PC warranty transferred
Confirm Qtegra checks
Dot Net loaded
Installation Details
□
□
□
Version 4301 460 00632