Installing Sidewall Adapters - Thermo Scientific Nicolet iZ10 User Manual

Installing sidewall adapters

Sidewall adapters are used to provide a tight purge seal for gas cells and other purged
accessories. To install sidewall adapters, press the adapter ring toward the sidewall to
compress the purge gasket, and then slide the adapter down into the clips on the side of the
transmission sample compartment.
Note: To remove a sidewall adapter, press the adapter ring toward the sidewall to compress
the purge gasket and then slide the adapter up out of the clips on the side of the sample
compartment.
Thermo Fisher Scientific Using Your Nicolet iZ10 Module 17