Removing The Crankshaft Assembly; Checking The Crankshaft Assembly - Yamaha YZ 2016 Series Owner's Service Manual

CRANKSHAFT ASSEMBLY AND BALANCER SHAFT

REMOVING THE CRANKSHAFT ASSEMBLY

EASB296292
1. Remove:
• Crankshaft assembly "1"
TIP
Remove the crankshaft assembly by using the
crankcase separating tool "2".
Crankcase separating tool
90890-04152
YU-A9642

CHECKING THE CRANKSHAFT ASSEMBLY

EASB296293
1. Measure:
• Crankshaft runout
Out of specification  Replace the crank-
shaft, bearing or both.
TIP
Turn the crankshaft slowly.
Runout limit
0.030 mm (0.0012 in)
2. Measure:
• Big end side clearance "a"
Out of specification  Replace the big end
bearing, crankshaft pin, or connecting rod.
2
1
3. Measure:
• Crank assembly width "a"
Out of specification  Replace the crank-
shaft.
4. Check:
• Crankshaft sprocket "1"
Damage  Replace the crankshaft.
5. Check:
• Crankshaft journal oil passage
Obstruction  Blow out with compressed
air.
5-76
Big end side clearance
0.150–0.450 mm (0.0059–0.0177
in)
Crank assembly width
55.95–56.00 mm (2.203–2.205 in)
1