Macro Instruction Commands - Star Micronics Multi-Font LC-IOII User Manual

Select draft elite download character set
Mode ASCII
Decimal Hexadecimal
< ESC > "1"
"5" 27 73 53 1B
49 35
IBM
< ESC > "I" <5> 27
73 5 1B 49 05
Selects the download character set, draft quality, and elite pitch (12 cpi).
Ignored if the NLQ Type Style switch was pressed during power-up or
if DIP switch 2-l is ON.
Select NLQ download character set
Mode ASCII Decimal Hexadecimal
< ESC > "I"
"6" 21
73 54 1B 49 36
IBM
< ESC > "I" <6> 27
13 6 1B 49 06
Selects the download character set and near letter quality. Ignored if the
NLQ Type Style switch was pressed during power-up or if DIP switch
2-l is ON.
Select ROM character set
Mode ASCII
Decimal Hexadecimal
<ESC>
"%"
"0" 21 37 48 1B 25 30
Both
<ESC>
'so,o" co>
27 37 0 1B 25 00
Stops using the download character set and returns to the built-in ROM
character set. Ignored when DIP switch 2-1 is ON.
MACRO INSTRUCTION COMMANDS
Define macro instruction
Mode ASCII Decimal
Hexadecimal
Both <ESC>
"+" ,,._ <RS> 27 43 30 1B 2B . . . 1E
Cancels any existing macro instruction and replaces it with the defined
instruction. The defined macro instruction consists of the characters
between the " + " and < RS > . These can be any printable characters
or control characters except < RS >, up to a maximum of 16 characters.
Execute macro instruction
Mode ASCII
Decimal Hexadecimal
Both
<ESC> "+" <l> 21
43 1 1B 2B 01
Executes a previously defined macro instruction.
85