Commands Used Macro Instruction - Star Micronics gemini-10X User Manual

4-6 Commands
Used
Macro Instruction
These commands are used to control the macro instruction.
CODE:
ESC
+ .....
RS
PURPOSE:
FORMAT:
REMARKS:
Define the macro instruction
CHR$(27) CHR$(43) ••••••••••• CHRS(30)
When this code is sent to the printer, the existing macro
instruction is cancelled.
The new macro instruction is set.
The maximum number of instruction bytes is 16.
The RS [CHR$(30)
1
character is used to end the command.
REFERENCE:
ESC
CODE:
ESC:
PURPOSE:
FORMAT:
REMARKS:
REFERENCE:
Select the macro instruction
CHR$(27) CHR$(33)
When this code is sent to the printer, the macro instruction
set
by
"ESC
& .....
RS" code is selected.
ESC
+ •••••
RS
-51-