Paper Loading; Line Feed; Paper Eject (Cut-Sheet Paper); Form Feed (Fanfold Paper) - Star Micronics LC-6211 User Manual

Paper loading

Prepare either cut-sheet or fanfold paper for feeding.
For details on how to prepare for paper feeding, see page 8 for fanfold paper
and page 27 for cut-sheet paper.
The POWER indicator flashes to indicate there is no paper in the printer.
Press SET/EJECT/PARK to feed the paper into the printer.

Line feed

Make sure the printer is off-line (ON LINE indicator is not lit).
Press LINE FEED once to feed paper one line. Holding down LINE FEED
continually feeds paper, one line at a time, until you release the button.

Paper eject (cut-sheet paper)

Make sure the printer is off-line (ON LINE indicator is not lit).
Press SET/EJECT/PARK to eject the paper.
After the paper is ejected, the printer will beep and the POWER indicator
will flash to indicate there is no paper in the printer.
Later, you can press SET/EJECT/PARK again to feed the paper back into
the printer.

Form feed (fanfold paper)

Make sure the printer is off-line (ON LINE indicator is not lit).
While holding down LINE FEED, press ON LINE to feed the paper to the
top of the next page.
Paper loading 17