Line Feed; Feed Paper N Lines; Form Feed; Horizontal Tab - Star Micronics TSP600 Series Programmer's Manual

Commands to Move the Print Position

Line feed

FUNCTION
CODE <LF>
0A
HEX
Prints the current line and feeds the paper to the next line.
REMARKS
If there is no data to print, only line feed is performed.
Carriage return
FUNCTION
CODE <CR>
0D
HEX
Prints the current line and feeds the paper to the next line.
REMARKS
This command is ignored when CR code is invalid.

Feed paper n lines

FUNCTION
<ESC> "a"
CODE
1B
HEX
Prints the current line and feeds the paper n lines (where n is
REMARKS
between 1 and 127).

Form feed

FUNCTION
CODE <FF>
0C
HEX
Feeds the paper to the top of the next page, according to the page
REMARKS
length set by <ESC>"C"n or <ESC>"C"<0>n when print start
position detect is ON, and according to the sensor output when print
start detect is OFF. The print position is at the left margin in both
cases.

Horizontal tab

FUNCTION
CODE <HT>
09
HEX
Moves the print position to the next horizontal tab stop. Ignored if
REMARKS
there is no next horizontal tab stop on the current line.
n
61 n
– 18 –