Using The Font Window - Star Micronics LC-240C User Manual

22 User Setup Utility

Using the Font window

While in the User Setup Utility, select Font from the menu bar.
The following describes the various settings that are available for each
parameter on this screen.
LQ Font
Select the font that you want to use as the printer's default letter-quality
font.
Pitch
Select the print pitch (character spacing) you want to use for printing.
Print mode
Select the print mode you want to use.
Selecting LQ provides letter quality output, while selecting Draft provides draft
quality. Draft quality printing may be less attractive than letter quality, but the
printing operation is faster.
Code Page
Select the code page you want to use for printing.
For details on what characters are included in each code page, see "Character
Sets" on page 60 of this manual.
Load Save General
Exit
LQ (•) Roman
Font ( ) Sanserif
Pitch (•) 10 cpi
( ) 12 cpi
Print (•) LQ
mode ( ) Draft
Code (•) IBM-PC (CP437)
page ( ) Multi-Lingual
Current Data: Current Font Setting
TAB = Next Box = Scroll up
SPACE = Set Function = Scroll down
Font Paper Adjust.
Font ( ) Enabled
*
lock (•) Disabled
Zero (•) Normal
*
style ( ) Slashed
Country (•) USA
*
( ) France
Char (•) Italic
*
table ( ) IBM Graphics 2
Port Help
*
*
*
*
= Menu Select